Westside Chevrolet >> Articles List >> A Look at Automatic Tire Chains

A Look at Automatic Tire Chains

With technology always advancing it is no wonder that automatic tire chains have made their way into the tire chain market. These tire chains take away the pain of attaching tire chains in wintry or wet conditions and can save drivers a lot of time.

Automatic tire chains can be used on pickup trucks, RVs, mobile homes, Trucks and buses, and they offer the traction of a single set of conventional snow chains at the touch of the button, which means an end to stopping and getting out of the vehicle.

To install automatic tire chains, drivers mount an electric switch to their dashboard which provides 12-volts to an air solenoid mounted on the vehicles frame rail. Compressed air is then supplied from either the vehicles on board air system or a 12-volt compressor kit. When the dashboard switch is activated, the solenoid opens, thus allowing compressed air to enter the air cylinder and lower the chain wheel so that it contacts the inside of the tire. The friction between the tire and the rubber covered chain wheel then causes the chain wheel to rotate, which creates enough centrifugal force to wave the chains out in front of the tire. Chain is spaced at 60 degree intervals in sixth lengths on the chain wheel. This guarantees that there are always two chains between the tire and the road service regardless of whether the driver is accelerating or decelerating. The traction is obtained both in forward and reverse. When the dashboard switch is turned off the solenoid exhausts the air, and the chain wheels are brought back to their resting position.

Automatic tire chains are a great new technology for anyone who wants tire chains but does not want the inconvenience of getting out of their car and installing the chains in adverse weather conditions.

scroll up